
XREAL Eyeの出荷が迫るなか、そろそろアップデートがあるかとは思ってましたがEyeと関係ない機能追加してきましよ!
はじめに
2025年6月25日付で新しいファームウェアが公開されていました。だいたい月一でPILOTのバージョンが上がってく感じで、途中にバグフィックスって周期になってますかね?
15.1.02.509_20250623

フルネームは15.1.02.509_20250623_15.A.00.069_20241211_1.6.0.20250620150908です。
前回からの変更はこんな感じ
- MCU 15.1.02.472_20250606 → 15.1.02.509_20250623
- DSP 15.A.00.069_20241211
- PILOT 1.5.0.20250606160032 → 1.6.0.20250620150908
リリースノートに記載されている内容は以下の通り
Ultra-Wide Mode
- Added support for the 21:9 Ultra-Wide aspect ratio. You can enable it by selecting 「21:9」 from 「Spatial Display」 > 「Ultra-Wide Mode」 menu, providing better compatibility with more devices and games.
Screen Size Adjustment
- Screen size adjustment is now available in 3D Mode, Ultra-Wide Mode, and Side View Mode. Go to 「Spatial Display」 > 「Screen Size」 to customize your viewing experience more freely.
Screen Distance Adjustment
- Distance adjustment is now supported in 3D Mode.
- The minimum screen distance across all modes can now be set to 1 meter. This allows you to pull the screen closer, making details clearer and reducing eye strain.
ざっくりと、今までのウルトラワイドモード(3840×1080)に追加して21:9(2560×1080)モードの追加。
3Dモード、ウルトラワイドモード、サイドビューモードでスクリーンサイズを調節できるようになった。
3Dモードで表示距離の調節ができるようになった。全モードで表示距離を1mまで設定できるようになった。めっちゃデカい。でもその状態で画面サイズを変更すると48インチが最大になるのでなんかおかしい?
気になった新機能
ウルトラワイド 21:9対応

知る人ぞ知る、Samsung DeXが対応しているワイドスクリーンの最大解像度がこの21:9 2560×1080なんですね。
Samsung DeX 21:9対応には設定が必要
Galaxy StoreからGood Lockをダウンロードして起動します。


Good LockからMultiStarをインストールして、I ♡ Samsung DeXを選択

外部ディスプレイの高解像度表示をONにします。なぜか説明文は簡体字です。
XREAL Oneを21:9モードにしてSamsung DeXを起動すればOK!
21:9モードのEDID
2560x1080で60Hzにのみ対応しています。地味な注目ポイントはMaximum image sizeが32:9モードは16:9と同じ186cm x 105cmだったのになぜかこちらは248cm x 105cmになってる所ですね。
開くとEDIDがずらーっと表示されます。邪魔なので畳んでます。
| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
---+-------------------------------------------------
00 | 00 FF FF FF FF FF FF 00 36 47 01 41 00 00 00 00
10 | 31 22 01 03 80 F8 69 78 0E E2 F5 A7 54 49 99 23
20 | 10 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
30 | 01 01 01 01 01 01 44 52 00 30 A2 38 2D 40 A0 58
40 | 45 00 00 38 A4 00 00 1E 00 00 00 00 00 00 00 00
50 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
70 | 00 58 52 45 41 4C 20 4F 6E 65 0A 20 20 20 00 86
header: 00 FF FF FF FF FF FF 00
serial number: 36 47 01 41 00 00 00 00 31 22
version: 01 03
basic params: 80 F8 69 78 0E
chroma info: E2 F5 A7 54 49 99 23 10 50 54
established: 00 00 00
standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: 44 52 00 30 A2 38 2D 40 A0 58 45 00 00 38 A4 00 00 1E
descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 4: 00 00 00 FC 00 58 52 45 41 4C 20 4F 6E 65 0A 20 20 20
extensions: 00
checksum: 86
manufacturer: MRG
product code: 411
serial number: N/A
manufacture date: Week 49 of 2024
edid version: 1.3
display type: digital
Maximum image size: 248cm x 105cm
Gamma: 2.2
DPMS levels: Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
Supported color formats: RGB 4:4:4, YCrCb 4:4:4
Chromaticity coordinates:
Red X: 0.655; Y: 0.330
Green X: 0.285; Y: 0.600
Blue X: 0.140; Y: 0.065
White X: 0.313; Y: 0.329
Established timings supported:
Standard timings supported:
Detailed timing 1 (Preferred):
Pixel clock: 210.600 MHz
Scan type: progressive
Refresh rate: 60
Horizontal
Active pixels: 2560
Total: 3120
Blank: 560
Front: 160
Sync: 88
Back: 312
Polarity: positive
Frequency: 67.5
Size(in mm): 2560
Border: 0
Vertical
Active pixels: 1080
Total: 1125
Blank: 45
Front: 4
Sync: 5
Back: 36
Polarity: positive
Size(in mm): 1080
Border: 0
Monitor name: XREAL One
Has 0 extension blocks
Checksum: 86 (valid)
表示距離 1.0m対応

画面サイズを191インチにしてから表示距離を1.0mにすると笑うほどデカく見えます。目の前に壁。
忘れがちなんですが、画面サイズと表示距離はボタン長押しで微調整できるので憶えておくと良いこともあるかもしれません。
おしまいに
X1の可能性を感じさせる機能追加でしたね。
ところで、私のXREAL Eyeはまだかね?
現場からは以上です。